Walk in Test Chamber

New height to Huanrui test walk in test chamber! The walk-in high and low temperature test chamber is commonly called the large high and low temperature test chamber, and belongs to the environmental test equipment in the reliability test equipment category. The test principle is to accelerate the simulation of temperature changes in the natural environment, in order to detect the use of test samples in a short time, to facilitate the detection of product performance, in order to make a safety performance evaluation. Recently, the installation and commissioning of the walk-in high and low temperature test room manufactured by Dongguan Huanrui Environmental Testing Equipment Co., Ltd. was completed. The customer of this walk-in equipment required to reach 5 degrees and 20% RH, but the cyclone test exceeded the range and reached 5 degrees 5% RH, which marks the new level of testing technology, and has been highly praised and affirmed by customers, which is cost-effective.

How to identify high temperature aging room manufacturers? First: choose a professional high temperature aging room manufacturers with technical strength High-temperature aging rooms are considered to be relatively high-tech projects. According to the company's own situation, the accuracy can be further improved, and the functions may be customized. Therefore, we must find a professional company with stronger technical strength. At present, there are many similar companies on the market. There are not many people in the company. They are outsourced to others when they receive the order. This is not good for controlling the quality of the project. There are too many uncontrollable factors. Second: try to choose a nearby high temperature aging room manufacturer Why do you say this? In the case of similar technical strength, you can choose a nearby company, so that the company is more familiar with the surrounding environment, and the distance is short, and it is easier to

Precautions for installation of air ducts in constant temperature aging rooms! 1. The position of the pre-embedded parts, nails or expansion bolts of the air duct and component supports and hangers of the constant temperature aging room shall be correct, firm and reliable, and the buried part shall be removed from oil and shall not be painted. 2. If there is no design requirement for the metal duct support and hanger spacing, the corresponding anchor, hanger spacing and cross bracing specifications shall be met for the non-insulated air duct. 3. For insulated metal ducts, the temperature of the air ducts will be different due to the different insulation materials used. When installing the ducts above the horizontal level, the spacing between the supports and hangers should be as designed. If there is no design requirement, the cyclone test is recommended to be installed horizontally, and the large spacing of the hangers can be according to the specified standards. 4. Appropr

Which methods can minimize the power consumption of large constant temperature and humidity chambers? As the industry develops more and more rapidly, the application of large-scale constant temperature and humidity test chambers is more and more extensive. Many users are responding to the process of using large-scale constant temperature and humidity test chambers , and the power consumption is large. To share with you the following effective ways can be referred to: 1. Placement: Large-scale constant temperature and humidity test chamber should be placed in a cool and ventilated place as far as possible, avoid direct sunlight, away from heat sources, and leave appropriate space on the left and right sides and back of the test box at the top of the test box to facilitate heat dissipation. . Because the ambient temperature around it will increase the power consumption of the test chamber. 2, should always check the seal of the test box seal, if the seal is deformed, it will a