Combustion Test Chamber

评论

发表评论

此博客中的热门博文

high low temperature chamber

图片
high low temperature chamber  As the number of users of high and low temperature alternating heat and humidity test chambers increases, the restrictions on user sites increase. The test chamber is a device for detecting the performance of products and materials. It is an essential test equipment for aviation, automotive, scientific research, electronics, electrical appliances, building materials and other fields. The parameters of the high and low temperature test chamber RHP-80BT : Inner cavity size: 400 × 400 × 500 (D * W * H) mm Dimensions: 1100 × 600 × 1550 (D * W * H) mm Temperature range: -40 to 150 Temperature uniformity: ≤2.0 Temperature fluctuation: ±0.5 Humidity range: 20% to 98% RH Humidity deviation: +2 ~ -3% (>75% RH) ± 5% RH (≤ 75% RH) Heating rate: -40 ~ 150 ≤ 60min Cooling rate: 20～-40≤60min Machine power: 5.5kW Power supply voltage: AC220V±10% 50±0.5Hz Huanrui/Reale Test 
阅读全文

New height to Huanrui test walk in test chamber!

图片
New height to Huanrui test walk in test chamber! The walk-in high and low temperature test chamber is commonly called the large high and low temperature test chamber, and belongs to the environmental test equipment in the reliability test equipment category. The test principle is to accelerate the simulation of temperature changes in the natural environment, in order to detect the use of test samples in a short time, to facilitate the detection of product performance, in order to make a safety performance evaluation. Recently, the installation and commissioning of the walk-in high and low temperature test room manufactured by Dongguan Huanrui Environmental Testing Equipment Co., Ltd. was completed. The customer of this walk-in equipment required to reach 5 degrees and 20% RH, but the cyclone test exceeded the range and reached 5 degrees 5% RH, which marks the new level of testing technology, and has been highly praised and affirmed by customers, which is cost-effective. ...
阅读全文

Maintenance of high low temperature cycle test boxes

图片
Maintenance of high low temperature cycle test boxes          high low temperature cycle test boxes 1. Temperature and humidity are an important factor affecting the performance of the device, which may cause corrosion of mechanical parts.High and low temperature mechanical Bufen lead to error or end of performance degradation; Component gratings, corrosion in thermostatic electron microscopes, focusing lenses, aluminum, etc., caused by insufficient light, stray light, noise, and even equipment stop working, thus affecting high and low temperatures, maintenance life should be corrected regularly. 2. After using for a period, the interior will accumulate a lot of dust. Huanrui test is recommended to clean under the guidance of the engineer, while also checking the radiator to re-tighten the heating element, sealed The optical frame window is cleaned, if necessary, calibrated, cleaned mechanical parts and necessary lubrication, and finally, restored to...
阅读全文