Walk in Test Chamber

Precautions for installation of air ducts in constant temperature aging rooms! 1. The position of the pre-embedded parts, nails or expansion bolts of the air duct and component supports and hangers of the constant temperature aging room shall be correct, firm and reliable, and the buried part shall be removed from oil and shall not be painted. 2. If there is no design requirement for the metal duct support and hanger spacing, the corresponding anchor, hanger spacing and cross bracing specifications shall be met for the non-insulated air duct. 3. For insulated metal ducts, the temperature of the air ducts will be different due to the different insulation materials used. When installing the ducts above the horizontal level, the spacing between the supports and hangers should be as designed. If there is no design requirement, the cyclone test is recommended to be installed horizontally, and the large spacing of the hangers can be according to the specified standards. 4. Appropr...

Burn in room attention: Installation of burn in room  (from Huanrui/Reale test) 1. Be sure to ground, and the wiring must be good and correct. If it is not grounded, it may cause electric shock, or the measurement may have a large error. 2 In order to prevent electric shock or malfunction and malfunction, please do not turn on the power before installation and wiring to avoid accidents. 3. Burn in room needs to be kept open, and if it is not smooth, it will malfunction or malfunction. 4. While burn in room is running,do not open the door. Because the opening at high temperature may cause burns to the operator. If it is cold, it may cause frostbite to the staff, and some may cause the evaporator to freeze. So affect the cooling effect, if you must open, please do the protection work. 5. Interior parts have a certain life span, so in order to use the equipment continuously and safely, please carry out regular maintenance and maintenance.