Important parts of high and low temperature test chamber

Important parts of high and low temperature test chamber 




The high and low temperature test chamber is composed of many accessories. Although the inner accessories are inconspicuous, they play a very important role. Generally, the faulty part is caused by the accessories. The following is important parts:
1. Door handle: Generally, there is no reaction door handle. If the damage is inconvenient to the user, you should contact the manufacturer for replacement.

2. Screws: High-low temperaturetest box also has loose screws for long-term use, so users should check regularly. If looseness is found, tighten it in time to avoid parts falling off.

3. Sealing strip: It adopts silicone rubber sealing strip which is resistant to years of aging and long-term resistance to -80 °C ~ 200 °C. Do not pull the seal during use. If it is pulled, it will cause the seal to fall off. In addition, it is necessary to regularly check whether the sealing strip is deformed or notched. If it should be repaired in time, it will affect the sealing performance of the high and low temperature damp heat test chamber.

4. Wet ball gauze: Need to be replaced frequently, because the wet ball gauze will harden for too long, and the water absorption will be worse, and it will also cause the humidity to show 100%, so understand the exact method before replacing.

5. Hose: There are many water pipes in the waterway system. Users should check the hose regularly for leaks or blockages. If there is a blockage, it needs to be cleaned in time, otherwise the test will not continue.

 (From Huanrui/Reale Test）

评论

发表评论

此博客中的热门博文

Which factors can affect the price of programmable constant temperature and humidity boxes?

图片
Which factors can affect the price of programmable constant temperature and humidity boxes? Programmable temperature and humidity chamber With the development of modern industry's speed, the demand for programmable constant temperature and humidity chamber is increasing. There are more and more manufacturers of programmable constant temperature and humidity boxes . The price of programmable constant temperature and humidity boxes on the market is also very different. Many users It will also be entangled in the purchase, why the price of the same programmable constant temperature and humidity box will be so different, the following will tell everyone what is the cause of this problem ": 1.  Temperature range:  the limit temperature of the programmable constant temperature and humidity chamber is now generally 150, while the extreme low temperature generally has different temperature segments, the lower the temperature is, the higher the price, because the lower the t
阅读全文

high low temperature chamber

图片
high low temperature chamber  As the number of users of high and low temperature alternating heat and humidity test chambers increases, the restrictions on user sites increase. The test chamber is a device for detecting the performance of products and materials. It is an essential test equipment for aviation, automotive, scientific research, electronics, electrical appliances, building materials and other fields. The parameters of the high and low temperature test chamber RHP-80BT : Inner cavity size: 400 × 400 × 500 (D * W * H) mm Dimensions: 1100 × 600 × 1550 (D * W * H) mm Temperature range: -40 to 150 Temperature uniformity: ≤2.0 Temperature fluctuation: ±0.5 Humidity range: 20% to 98% RH Humidity deviation: +2 ~ -3% (>75% RH) ± 5% RH (≤ 75% RH) Heating rate: -40 ~ 150 ≤ 60min Cooling rate: 20～-40≤60min Machine power: 5.5kW Power supply voltage: AC220V±10% 50±0.5Hz Huanrui/Reale Test 
阅读全文

How to identify high temperature aging room manufacturers?

图片
How to identify high temperature aging room manufacturers? First: choose a professional high temperature aging room manufacturers with technical strength High-temperature aging rooms are considered to be relatively high-tech projects. According to the company's own situation, the accuracy can be further improved, and the functions may be customized. Therefore, we must find a professional company with stronger technical strength. At present, there are many similar companies on the market. There are not many people in the company. They are outsourced to others when they receive the order. This is not good for controlling the quality of the project. There are too many uncontrollable factors. Second: try to choose a nearby high temperature aging room manufacturer Why do you say this? In the case of similar technical strength, you can choose a nearby company, so that the company is more familiar with the surrounding environment, and the distance is short, and it is easier to
阅读全文